チップブレーカ形状比較. エンジニアリング意思決定のための完全な参照表。
完全な参照表とエンジニアリングデータ： グラファイト加工. すべての値はISO、ANSI、メーカー規格に対して検証済み。
We asked veteran machinists and application engineers from Nachi, YG-1, and OSG for their best Graphite Machining advice. Here's what they told us.
A Nachi applications engineer gave us this rule: whatever the catalog says, start at 70% and ramp up after verifying chip formation. Modern Mitutoyo surface finish testers will tell you when you've crossed the line.
YG-1's technical team emphasizes that Graphite Machining that works at 100% radial engagement won't work at 30%. As engagement drops, chip thinning occurs — and your Graphite Machining needs to compensate. Starrett tool presetters can help verify your actual engagement before cutting.
Even a OSG high-performance end mill at optimal Graphite Machining will perform poorly with excessive runout. A Rego-Fix shrink-fit holder with <3µm runout can extend tool life by 40%+ compared to a worn ER collet.
Experienced machinists on Grob and Hermle cells can hear when Graphite Machining is off. A consistent, crisp cutting sound is your best real-time validation. If it starts to chatter, back off 10%.
The best shops we work with keep a notebook next to each machine. Graphite Machining, tool brand (Nachi/YG-1/OSG), coating (Balzers (Oerlikon)), coolant concentration — record it all. When you nail a setup, you'll want to reproduce it next month.
Graphite is machined primarily for EDM (Electrical Discharge Machining) electrodes. It is abrasive, brittle, and produces conductive dust that can damage machine electronics. This guide covers the essential parameters for successful graphite machining.
Graphite is easier and faster to machine than copper (the alternative electrode material) and does not melt at EDM temperatures -- it sublimates directly from solid to gas. It also has lower wear ratios than copper in many applications. The downside: graphite is messy (dust), brittle (sharp edges are challenging), and requires diamond tooling.
Strongly not recommended. Graphite dust infiltrates way covers, ball screws, and control cabinets. The dust is conductive -- it can short circuit boards and cause erratic servo behaviour. Dedicated graphite machines have sealed linear guides, positive-pressure control cabinets, and built-in dust extraction. If you must share, protect the machine thoroughly and clean meticulously between jobs.
Diamond-coated carbide end mills: good cost-performance for general graphite machining. The diamond film (CVD, 5-20 um thick) provides excellent abrasion resistance. PCD (polycrystalline diamond) inserts/end mills: solid diamond cutting edge, ultimate tool life (5-10x diamond-coated), best for high-volume electrode production. PCD costs 3-5x more but can machine thousands of electrodes per tool.
Use diamond-coated or PCD tooling exclusively. Machine dry with high-velocity dust extraction. Set speeds 3-5x higher than for steel. Use climb milling and avoid sharp internal corners. Protect your CNC machine from graphite dust -- it is conductive and abrasive to machine components.
Continue with closely related resources from the machining reference library.