CNC加工 ツールセット

Calculate optimal RPM, IPM, and chip load for carbide end mills across 10 material groups.

Calculate feed per tooth (IPT/fz) and verify chip load against recommended ranges.

Calculate SFM, RPM, or cutting speed for turning and milling operations.

Calculate material removal rate in cm³/min and in³/min for any machining operation.

Calculate required spindle power and torque for milling and turning.

Calculate cutting forces, torque, and resultant loads on the tool.

Estimate turning cycle time for OD, facing, boring, and parting operations.

Calculate theoretical Ra and Rz surface finish from feed and nose radius.

Calculate X/Z compensation for CNC lathe G41/G42 tool nose radius.

Calculate max ramping angle and Z feed rate for helical milling.

Calculate HSM peel milling parameters for trochoidal toolpaths.

Calculate safe speeds and feeds for full-width slotting and keyway cutting.

Calculate optimal stepover and depth of cut for multi-pass milling.

Calculate effective cutting diameter of ball nose end mills at depth of cut.

Calculate helical milling parameters for circular interpolated holes.

Calculate thermal expansion of metals for precision machining compensation.

Calculate TIR effects on surface finish, tool life, and hole accuracy.

Calculate adjusted feed rates when using override on your CNC control.

Calculate safe peck depths and retract heights for deep hole drilling.

Calculate number of passes and DOC for CNC threading cycles.

Convert between feed per rev, feed per tooth, and feed per minute.

Find the correct tap drill size for metric, UNC, and UNF threads at any engagement.

Calculate tapping feed rate (F) from RPM and thread pitch for rigid tapping.

Calculate drill point length for 118°, 135°, and custom point angles.

Calculate minimum thread engagement and torque-to-tension relationships.

Convert between metric pitch and imperial TPI thread specifications.

Calculate NPT thread dimensions including taper, pitch diameter, and length.

Calculate tap drill size for any thread engagement percentage.

Calculate drill sizes for thread forming (roll tapping) in various materials.

Calculate lead angle (helix angle) for single and multi-start threads.

Calculate pitch diameter measurement using the three-wire method.

Design step drill geometry including diameters, lengths, and transition angles.

Calculate countersink and counterbore depth for standard fasteners.

Calculate pre-reaming drill size and reaming stock allowance by material.

Calculate gun drilling parameters: speeds, feeds, and coolant pressure.

Calculate tap drill depth and min full thread for blind hole tapping.

Compare insert grades across Sandvik, Kennametal, Iscar, and more.

Cross-reference ISO P/M/K/S/H carbide grades by application and material.

Calculate weight of carbide, steel, aluminum, and brass round stock.

Calculate material cost per part including scrap recovery and nesting efficiency.

Convert between HRC, HRB, HB, HV, and tensile strength for all metals.

Compare machinability ratings of AISI steels and adjust speeds accordingly.

Compare 304 vs 316 stainless steel for machining and corrosion resistance.

Complete speeds, feeds, and tooling guide for Ti-6Al-4V and other titanium alloys.

Compare 6061 vs 7075 aluminum for machinability, strength, and applications.

Calculate dimensional change and optimal heattreating specs for A2, D2, O1, S7.

Speeds and feeds for gray iron, ductile iron, and compacted graphite iron.

Match carbide coating (TiN, TiAlN, AlTiN, DLC, CVD) to your application.

Convert between PSI, MPa, and tensile strength from hardness values.

Machining parameters for Delrin, Nylon, PTFE, Acrylic, and other engineering plastics.

Speeds, feeds, and tooling for EDM graphite electrode machining.

Optimal speeds and feeds for free-machining brass and copper alloys.

Estimate tool life when machining Inconel, Hastelloy, Waspaloy, and Rene 41.

Thermal conductivity data for H13, P20, D2, and S7 die and mold steels.

Calculate total manufacturing cost per part including material, labor, and overhead.

Calculate optimal tool change frequency balancing tool cost and productivity.

Calculate return on investment for CNC machine purchases and automation projects.

Calculate total batch manufacturing cost with setup amortization and quantity discounts.

Calculate scrap metal recovery value for steel, aluminum, brass, and carbide.

Calculate shaft and hole tolerances for ISO fit classes H7/g6, H7/h6, and more.

Calculate XY coordinates for bolt circles with N holes at any radius.

Calculate flatness tolerance based on part size and GD&T requirements.

Calculate gage block stack height for sine bar angle setup.

Rotate XY coordinates by any angle around any origin point.

Calculate chamfer width, depth, and angle from any two known values.

Calculate taper per inch, taper per foot, and included angle for tapered surfaces.

Complete reference guide for GD&T symbols, datums, and feature control frames.

Calculate keyway and keyseat depth for standard inch and metric keys.

Calculate dovetail dimensions, cutter width, and measurement over pins.

Calculate spur gear module, pitch diameter, and tooth dimensions.

Quick reference for common G-code commands and cycles for CNC mills and lathes.

Quick reference for M-code auxiliary commands for CNC machine control.

Convert between PSI, bar, MPa, kPa, and kg/cm² pressure units.

Convert between N·m, ft·lb, in·lb, and kg·m torque units.

Multi-category unit converter covering length, weight, volume, and temperature.

Calculate AQL sampling plans per ANSI/ASQ Z1.4 standard for lot inspection.

Calculate right triangle sides, angles, area, and hypotenuse for setup.

Calculate diameter, circumference, radius, and area of circles.

Calculate tangent points on circles for toolpath geometry.

Convert between Celsius, Fahrenheit, and Kelvin for machining coolant temps.

Calculate weight of round steel, aluminum, and brass bars per foot and meter.

Calculate hollow bar and pipe weight for schedule 40/80 pipe sizes.

Calculate minimum wall thickness for tubular parts under machining loads.

Calculate total shipping weight for tooling orders and crating estimates.

Estimate import duties and taxes for international carbide tooling shipments.

Calculate tiered pricing discounts for volume tool purchases.

Calculate OEE, utilization, and throughput for manufacturing cells.

Calculate inventory turnover ratio and days of inventory for tool crib.

Calculate compound interest for capital equipment investment analysis.

Analyze tool change time impact on overall cycle time and productivity.

Calculate per-edge tooling cost including regrind and coating expenses.

Calculate machine spindle power requirements based on cutting parameters.

Calculate coolant mix ratio using refractometer Brix readings.

Calculate total annual coolant cost including concentrate, disposal, and labor.

Convert between microns, inches, and millimeters for surface finish specs.

Convert surface speed between SFM and meters per minute for global standards.

Convert between polar and rectangular coordinates for CNC programming.

25-minute productivity timer for focused machining programming sessions.

Organize and categorize your cutting tool inventory by operation and material.

Compare automated vs manual machining costs for build vs buy decisions.

Convert between R- and IJK-format circular interpolation for G-code.