Which aluminum alloy is easiest to machine?

6061 aluminum is considered the most machinable common alloy, producing consistent chip breakage and excellent surface finishes. 7075 requires more attention to tool sharpness and speeds. For complex geometries with tight tolerances, 6061 is typically the safer choice.

Can I use the same tooling for 6061 and 7075?

Yes, with adjustments. Carbide end mills work well for both alloys. Reduce spindle speed by 30–40% when switching from 6061 to 7075, and ensure adequate coolant flow to manage the higher cutting forces of 7075.

Does heat treatment affect machinability of these alloys?

Yes. 6061-T6 and 7075-T6 are the most common tempers for machining. The T6 condition provides good strength while maintaining acceptable machinability. Over-aged tempers may reduce strength but offer slightly better chip formation. ⚡ Calculated for Carbide-Tooling.com High-Performance Series. View Catalog →

MRR電卓 › 表面粗さ › Aluminum Alloy Table

📋 Grade Database

5xxx

6xxx

7xxx

グレード参照 Micron/インチコンバータすべてのツール見積もりを取得するプライバシーの中でカタログを見る →スピード & フィード

硬度コンバータ

7xxx

Cycle Time Calculator Metal Cost Calculator Coating Selector Ramping Angle Calculator Coolant Lifecycle Cost Automation vs Manual Peck Drilling Calculator Coordinate Rotation Calculator

5xxx

7xxx

関連精密工具

ガイド

7xxx