SUS304ステンレス鋼切削条件。加工パラメータの即座のWall Thickness (mm), Min Wall (mm), Safety Factorを取得。
悪い数値のコストは？典型的なジョブショップシナリオで計算してみましょう。もし 肉厚計算機 が15%攻撃的すぎる場合、 OSG エンドミルを余分に買うだけでなく — 予期しないダウンタイム、手直し、納期遅れのコストを払っています。
| Premature Ingersoll tool failures | $6,400/yr |
| Unplanned machine downtime | $12,200/yr |
| Rework / scrap parts | $8,700/yr |
| Excess Rego-Fix holder wear | $2,100/yr |
| Total Annual Loss | $29,400/yr |
シナリオを逆にしてみましょう。肉厚計算機を最適化 — メーカー推奨の開始パラメータを特定のOSGまたはIngersoll工具に使用し、Starrettプリセッターで検証 — することで年間約3万ドルを回収できます。これは新しいDMG Mori工具プローブまたは1年分のOSGインサートに相当します。
ROIは即時。最初のパーツが最適化され、最初の節約日。
Wall thickness determines the strength and pressure capacity of tubes, pipes, and hollow components. This calculator computes the actual wall, minimum required wall under internal pressure, and the resulting safety factor.
Thin-wall (Barlow's formula) applies when wall thickness is less than 10% of the inner radius. It assumes uniform stress through the wall. Thick-wall (Lame formula) is needed for hydraulic cylinders and high-pressure vessels where stress varies through the wall — use for wall/radius ratio over 0.1.
4:1 is standard for industrial hydraulics per ISO 4413. Aircraft hydraulics use 4:1 on proof pressure (typically 1.5x working pressure). Test pressure is usually 1.5-2x working pressure. A manifold rated at 210 bar (3000 psi) should withstand 840 bar burst pressure.
The allowable stress in the formula depends on the material yield strength and safety factor. 6061-T6 aluminium (yield 240 MPa) requires thicker walls than 7075-T6 (yield 470 MPa) for the same pressure. Stainless 316 at 200 degrees C has only 70% of its room-temperature strength — derate for elevated temperature.
Enter the outer diameter, inner diameter, internal pressure (if applicable), and material allowable stress. The calculator shows wall thickness, minimum required wall under pressure, and the safety factor. For hydraulic applications, maintain at least 4:1 safety factor on ultimate tensile strength.
Continue with closely related tools from the machining calculator library.