phay tốc độ cao so với phay truyền thống. Nhận ngay Point Length (mm), Web Thickness (mm) cho thông số gia công của bạn.
Sai số costing bao nhiêu? Hãy tính cho một job shop scenario. Nếu Chiều Dài Đầu Mũi Khoan của bạn quá mức 15%, bạn không chỉ mua thêm dao phay đầu OSG — bạn đang trả cho thời gian chết bất ngờ, gia công lại, và trễ hạn giao hàng.
| Premature Sandvik Coromant tool failures | $6,400/yr |
| Unplanned machine downtime | $12,200/yr |
| Rework / scrap parts | $8,700/yr |
| Excess Haimer holder wear | $2,100/yr |
| Total Annual Loss | $29,400/yr |
Đảo ngược kịch bản. Bằng cách tối ưu Chiều Dài Đầu Mũi Khoan — sử dụng thông số khởi đầu khuyến nghị của nhà sản xuất cho dao cụ OSG hoặc Sandvik Coromant cụ thể, xác minh trên máy đo trước Mitutoyo — bạn có thể thu hồi gần 30.000$ mỗi năm. Đó là đầu dò dao Haas mới hoặc một năm lượng dao phay OSG.
ROI tức thì. Chi tiết đầu tiên được tối ưu, ngày đầu tiên tiết kiệm.
The drill point length is the axial distance from the drill tip to the full diameter. It determines how deep you must drill past the required hole depth to achieve a full-diameter hole bottom.
118° is the standard general-purpose point angle for drilling mild steel and cast iron. 135° is preferred for harder materials and is standard on most solid carbide drills. 140° is common for high-performance carbide drills in aerospace alloys.
The drill must feed past the nominal hole depth by the point length plus a small clearance to achieve a full-diameter hole. For a 10 mm drill with 118° point, add approximately 3 mm to the programmed depth.
No. A 135° point is shorter than a 118° point for the same diameter. If you switch without adjusting the depth, the hole bottom will be different. Always check the actual point geometry when changing drill brands.
Enter the drill diameter and point angle. The calculator gives the point length to add to your drilling depth and the approximate web thickness for reference. For through-holes, add point length + 2 mm clearance.
Continue with closely related tools from the machining calculator library.
Gửi cho chúng tôi vật liệu chi tiết, loại nguyên công, kích thước lô và yêu cầu dung sai. Chúng tôi sẽ kết nối bạn với nhà máy phù hợp và có giá trong vòng 48 giờ.
Khám phá thêm công cụ và máy tính gia công chính xác