yêu cầu độ bóng bề mặt chi tiết hàng không. Nhận ngay SFM, m/min, RPM cho thông số gia công của bạn.
Không phải mọi nhà sản xuất dao cụ đều công bố Chuyển Đổi SFM sang m/phút theo cùng cách. Trong khi vật lý cơ bản không đổi, phạm vi khuyến nghị, biên an toàn và hướng dẫn ứng dụng khác biệt đáng kể giữa OSG, Dormer Pramet, và Kyocera. Hiểu những khác biệt này giúp bạn ra quyết định dao cụ tốt hơn.
Tiếp cận theo nhóm vật liệu với CemeCon-coated grades as default. Their hướng dẫn ứng dụng provide giá trị khởi đầu bảo thủ with dải điều chỉnh rộng. CoroPlus tích hợp kỹ thuật số offers real-time Chuyển Đổi SFM sang m/phút optimization via ToolGuide.
Nổi tiếng với thông số khởi đầu tích cực — đặc biệt trong thép và gang. NOVO digital platform tự động điều chỉnh Chuyển Đổi SFM sang m/phút dựa trên mức độ tham gia đường dao. Thường là tham chiếu for ứng dụng tiến feed cao.
Tiên phong của đa hướng Chuyển Đổi SFM sang m/phút — their IQ series inserts thrive in turning profiles where engagement angle shifts continuously. Application-specific grades for ISO P/M/K with narrow, optimized Chuyển Đổi SFM sang m/phút windows.
Key takeaway: Always default to your specific tool supplier's Chuyển Đổi SFM sang m/phút charts. The differences between OSG, Dormer Pramet, và Kyocera reflect different lớp phủ chemistries (CemeCon vs. in-house) and carbide substrate formulations. A OSG parameter won't necessarily translate to a Dormer Pramet equivalent — even at the same ISO grade designation.
Surface speed (cutting speed) is the relative velocity between the cutting edge and the workpiece surface. It is measured in surface feet per minute (SFM) in imperial shops and metres per minute (m/min) in metric shops.
SFM is standard in the United States where imperial units dominate machine shop practice. Metric countries (Europe, Asia) use m/min. The conversion factor is 1 m/min = 3.28084 SFM.
Surface speed depends on the workpiece material and cutting tool material. Carbide in mild steel: 150-300 m/min (490-980 SFM). Carbide in aluminium: 300-600 m/min (980-1970 SFM). HSS in steel: 20-40 m/min (65-130 SFM).
Excessive surface speed generates excessive heat at the cutting edge, leading to rapid flank wear, built-up edge, poor surface finish, and potential insert failure. Reduce speed by 15-20% if you see burning or discoloration.
Enter your tool or workpiece diameter and RPM to get the surface speed in both m/min and SFM. Alternatively, work backwards from a target surface speed to find the required RPM.
Continue with closely related tools from the machining calculator library.
Gửi cho chúng tôi vật liệu chi tiết, loại nguyên công, kích thước lô và yêu cầu dung sai. Chúng tôi sẽ kết nối bạn với nhà máy phù hợp và có giá trong vòng 48 giờ.
Khám phá thêm công cụ và máy tính gia công chính xác