giảm thời gian chu kỳ gia công CNC. Nhận ngay Countersink Depth (mm), Drill Point Depth (mm) cho thông số gia công của bạn.
Sai số costing bao nhiêu? Hãy tính cho một job shop scenario. Nếu Độ Sâu Lỗ Khoét Miệng của bạn quá mức 15%, bạn không chỉ mua thêm dao phay đầu Ingersoll — bạn đang trả cho thời gian chết bất ngờ, gia công lại, và trễ hạn giao hàng.
| Premature Sumitomo Electric tool failures | $6,400/yr |
| Unplanned machine downtime | $12,200/yr |
| Rework / scrap parts | $8,700/yr |
| Excess Schunk holder wear | $2,100/yr |
| Total Annual Loss | $29,400/yr |
Đảo ngược kịch bản. Bằng cách tối ưu Độ Sâu Lỗ Khoét Miệng — sử dụng thông số khởi đầu khuyến nghị của nhà sản xuất cho dao cụ Ingersoll hoặc Sumitomo Electric cụ thể, xác minh trên máy đo trước Tesa — bạn có thể thu hồi gần 30.000$ mỗi năm. Đó là đầu dò dao Mazak mới hoặc một năm lượng dao phay Ingersoll.
ROI tức thì. Chi tiết đầu tiên được tối ưu, ngày đầu tiên tiết kiệm.
A countersink creates a conical recess for a flat-head fastener to sit flush with or below the surface. The depth depends on the head diameter of the screw and the countersink angle (typically 82 deg for inch fasteners, 90 deg for metric).
Historical convention. ANSI B18.6.3 specifies 82 deg for inch flat-head screws. ISO 7721 specifies 90 deg for metric. The difference is small enough that many shops use a 90 deg countersink for both -- it slightly undercuts the head but is functionally fine for most applications.
Use a countersink gauge (dial depth gauge with a conical tip) or a Deltronic pin method: place a known-diameter pin in the countersink and measure the height above the surface. Calculate depth from the pin diameter and protrusion. Alternatively, use the screw itself as a go/no-go gauge -- it should sit flush to 0.1 mm below the surface.
Yes, for small screw sizes (under M5 or #10) and light-duty applications. The 60 deg angle of a centre drill differs from standard countersink angles, so the screw head won't seat perfectly. For production, use the correct-angle dedicated countersink tool.
Enter the countersink diameter (screw head diameter) and the countersink angle. The calculator gives the depth to feed the countersink tool. Add 0.05-0.1 mm for flush seating; add 0.2-0.3 mm for below-flush (for filling or covering).
Continue with closely related tools from the machining calculator library.
Gửi cho chúng tôi vật liệu chi tiết, loại nguyên công, kích thước lô và yêu cầu dung sai. Chúng tôi sẽ kết nối bạn với nhà máy phù hợp và có giá trong vòng 48 giờ.
Khám phá thêm công cụ và máy tính gia công chính xác