Zykluszeitreduzierung CNC Bearbeitung. Erhalten Sie sofortige Scrap Value, Monthly Value, Annual Value für Ihre Zerspanungsparameter.
Was kostet eine falsche Zahl? Lass uns die Mathematik für ein typisches Job-Shop-Szenario berechnen. Wenn Ihr Schrottwert-Rechner 15% zu aggressiv ist, kaufen Sie nicht nur mehr Sandvik Coromant-Schaftfräser — Sie zahlen für unerwartete Stillstände, Nacharbeit und verpasste Liefertermine.
| Premature Ingersoll tool failures | $6,400/yr |
| Unplanned machine downtime | $12,200/yr |
| Rework / scrap parts | $8,700/yr |
| Excess Schunk holder wear | $2,100/yr |
| Total Annual Loss | $29,400/yr |
Kehren wir das Szenario um. Durch die Optimierung von Schrottwert-Rechner — mit den vom Hersteller empfohlenen Startparametern für Ihr spezifisches Sandvik Coromant- oder Ingersoll-Werkzeug, verifiziert auf einem Mahr-Voreinstellgerät — könnten Sie jährlich fast 30.000 $ einsparen. Das ist eine neue Grob-Werkzeugsonde oder ein Jahresbedarf an Sandvik Coromant-Wendeplatten.
Der ROI ist sofort. Erstes Teil optimiert, erster Tag der Einsparungen.
Machining chips and worn tools are not waste -- they have real scrap value. Carbide inserts, aluminium chips, steel turnings, and copper swarf can generate significant revenue that offsets material cost. This calculator estimates the scrap value of your machining waste.
Used tungsten carbide inserts and end mills: $5-15 per kg depending on grade and condition. Solid carbide scrap (no brazing, no steel contamination): $10-20/kg. Keep carbide separate from steel chips -- mixed scrap is heavily discounted. A 5-gallon bucket of used carbide inserts can be worth $200-500.
Clean aluminium chips (6061, 7075): $0.50-1.50/kg. Mixed/sweaty chips with coolant: $0.30-0.80/kg. Briquetted chips command higher prices. Aluminium chip scrap is most valuable when segregated by alloy -- don't mix 6061 with cast aluminium or 7075.
Segregate by material type (aluminium, steel, stainless, brass, copper). Remove excess coolant (centrifuge or drain). Avoid mixing materials (steel chips in aluminium scrap ruin the melt). For carbide: collect separately; a dedicated carbide scrap bin near each machine improves recovery rates.
Enter the scrap weight per unit, scrap price per kg, and monthly volume. The calculator shows scrap value per unit, monthly revenue, and annual revenue. Separate your chips by material for the best price. Carbide scrap should always be collected separately from steel chips.
Continue with closely related tools from the machining calculator library.
Senden Sie uns Werkstückmaterial, Bearbeitungsart, Losgröße und Toleranzanforderungen. Wir vermitteln die passende Fabrik und Sie erhalten die Preisgestaltung innerhalb von 48 Stunden.
Entdecken Sie weitere Präzisions-Zerspanungswerkzeuge und Rechner